Anti-Stick Spray is the Cleaner, Safer Solution for Gaskets,
Nuts and Bolts
DF's Anti-Stick Spray is the cleaner, safer alternative to
anti-seize compounds for use on gaskets, nuts and bolts. Its broad chemical
compatibility and ability to withstand temperatures up to 1000°F (538°C)
make this Anti-Stick Spray ideal for your industrial lubrication needs.
When used with gaskets, DF's spray reduces gasket adhesion to flanges, and
it does not fill in the radial grooves on flanges as other anti-seize
compounds do. Gasket removal is easier ?you no longer have to waste time
and risk damaging equipment by scraping and grinding gaskets from flanges.
Full gasket removal ensures that the integrity of the seal isn't compromised
by installing new gaskets over the remains of the old gaskets.
Using anti-seize compounds (grease embedded with metallic particles) on
gaskets can cause serious problems. This type of anti-seize compound, meant
for nut and bolt assemblies, can chemically attack some gaskets and can
cause the gasket to crush during installation. These compounds can also fill
up the flange serrations, causing them to blow out prematurely. The
specially designed formula of DF's Anti-Stick Spray ensures that your
gaskets, as well as nuts and bolts, provide high performance and release
easily.
When applied to nuts and bolts, this Anti-Stick Spray achieves torque values
almost identical to those of grease-based thread lubricants. As with other
lubricating products, nut and bolt threads should be free from greases and
oils prior to application.
